Performance Features
| • OEM Design |
| • Adaptable to the valve by means of Valve-Adaptor (sold separately) |
| • First-Open Function |
| • Hub Display |
| • Snap-On Installation |
| • 100% Protection against leaky valves |
The OEM Actuator 24 V is a thermoelectric valve-drive for opening and closing valves on heating circuit distributors of concealed floor heating and cooling systems.
The OEM Actuator has been developed especially for customer-specific use in the OEM business. Features, as protection in case of leaky valves, compact and modern casing, versions in normally-closed and normally open, valve-adaptor system and an enhanced product life time have been of particular importance. This allows
fulfilling the requirements within the bounds of technical reliability, improved installation and customer-/service friendliness for manufacturer of concealed floor heating and cooling system. .
The OEM Actuator 24 V is controlled by a 24 V room thermostat with two-point output or pulse-width modulation.
普通型电热执行器：24V常闭
A 4004 资料下载
Thermoelectric valve-drive for driving valves on heating circuit distributors. De-energised status: normally-closed (NC).
| Operating Voltage: | 24 V, 50/60 Hz |
| Operating Power: | 1,8 W |
| Degree/Protection Type: | IP 54/ II |
| Stroke: | 4 mm |
| Actuating Force: | 100 N ± 5 % |
| Cable | 2 x 0,75 mm² |
| Cable Length: | 1000 mm |
| Housing Colour: | grey |
| Dimensions (mm) H/W/D: | 54+4 / 44 / 47 |
普通型电热执行器：24V常开
A 4104 资料下载
Thermoelectric valve-drive for driving valves on heating circuit distributors. De-energised status: normally-open (NO).
| Operating Voltage: | 24 V, 50/60 Hz |
| Operating Power: | 1,8 W |
| Degree/Protection Type: | IP 54/ II |
| Stroke: | 4 mm |
| Actuating Force: | 100 N ± 5 % |
| Cable | 2 x 0,75 mm² |
| Cable Length: | 1000 mm |
| Housing Colour: | grey |
| Dimensions (mm) H/W/D: | 54+4 / 44 / 47 |
普通型电热执行器：24V终端开关常开（4连接线）
A 4024 资料下载
De-energised status: Normally-Close. The integrated micro switch with floating contact allows direct operation of a pump or a fan control unit.
| Operating Voltage: | 24 V, 50/60 Hz |
| Operating Power: | 1,8 W |
| Degree/Protection Type: | IP 54/ II |
| Stroke: | 4 mm |
| Actuating Force: | 100 N ± 5 % |
| End Switch Current | 24 V DC: 3 A ohmic load, 1 A inductive load |
| Cable | 2 x 0,75 mm² |
| Cable Length: | 1000 mm |
| Housing Colour: | grey |
| Dimensions (mm) H/W/D: | 54+4 / 44 / 47 |
